Cart
Your shopping cart is empty!
Product catalog
Specification
Wheel count: 4 wheels
Wheel size: 80 mm
Description
The POWERSLIDE NEXT Black Red 80 is a formidable urban inline skate, fast, durable, and customizable, this impressive skate sets a new standard for urban skating. It all starts with the renowned NEXT hard boot that’s not only precise, but also tough as nails and ready for intense urban inline skating. Skate fast, turn quickly, jump big gaps, the capable NEXT Black Red 80 can do it all with style. The NEXT hard boot is complemented with a supportive cuff that can be customized to match your individual skating needs. You can easily adjust the height and forward flex of the cuff, giving you the perfect fit every time. Of course, comfort is key and the NEXT Black Red 80 comes through big time with a heat-moldable MYFIT Recall Dual Fit liner. The liner incorporates memory fit padding that dampens vibrations, helps cushion landings, and provides superb comfort even during long skate sessions. The POWERSLIDE NEXT Black Red 80 comes with the famous TRINITY 3-point mounting system that gives skaters a low center of gravity that gives you excellent stability and control. The TRINITY system also allows you to adjust the position of the frame to amplify your skating performance. Looking for a thrill? Mounted to the boot are the light and rigid Elite cast aluminum frames that have been proven to be an excellent frame for urban skating. The Elite frame now matches your shoe sizes, up to size 42/43 (EU). We deliver the skate with the 243mm/4x80mm setup, and from size 44/45 up the skate is equipped with a 275mm/44x90mm frame enabling you to upgrade your Next 80 to a Next 90! Riding on fast and grippy 4x80mm Spinner wheels and super-smooth WICKED ABEC 9 bearings, you get a fast, intense ride every time. Our mission with the POWERSLIDE NEXT Black Red 80 was to reach the perfect balance of performance, quality, and comfort in a hard boot urban inline skate. Mission accomplished.
Sizes: Dual Sizes
Boot Type: Hardboot
Shell / Outsole Material: Glass-fiber reinforced plastic (GFRP) - GFK
Cuff Material: Glass-fiber reinforced plastic (GFRP) - GFK
Heat Moldability: MYFIT liner with 80°C
Material Upper / Liner: Elasthan, SBR and polyurethane (PU) leather patches
Top Closure: PS Classic micro adjustable buckle
45° Closure / Front Foot Closure: Micro adjustable Force ratchet buckle / Standard lacing
Liner: MYFIT Recall dual fit liner
Liner Top Closure: Lacing
Innersole: MYFIT EVA skatesole
Shock Absorber: MYFIT, 10mm
Ventilation: Medium
Inline Skate Height in CM: 30,0cm (size 42/43)
Frame Name: Powerslide Elite
Frame Material: ADC10 aluminum
Frame Mounting Standard: TRINITY 3-point mounting
Max. Wheel Size: 36-43 = 80mm / 44-49 = 90mm
Frame Wheel Base (Inch / MM): 36-43 = 9.6" (243mm) / 44-49 = 10.8" (275mm)
Frame Axles: Single axle steel 8mm, hex 4mm
Adjustable Side to Side: Yes, TRINITY shell, 4mm
Adjustable Front to Back: Yes, TRINITY X shell, 8mm
Frame Manufacturing Process: 3D cast
Wheel Name: Powerslide Spinner
Wheel Diameter: 110mm
Wheel Hardness: 88A
Wheel Compound: SHR= Super High Rebound
Wheel Bearing Standard: 608 Standard
Wheel Spacer: AL floating (UFO) spacer, 8mm
Wheel Width: 24mm
Bearing Brand: WCD Wicked
Bearing Rating: ABEC 9
Bearing Standard: 608 Standard
Bearing Material: Chrome steel
Bearing Shield: RZ, single sided rubber coated steel shield
Bearing Lubrication: Kyodo grease
Weight: 1620g (size 42/43)
Included Accessories: 4 pcs. of screws and anti rivets for 45° buckle, tool - hex 4mm
Brake Compatibility: Powerslide HABS brake (907031)
Wheel Manufacturing Process: Cast
Wheel Setup: 4x80mmSize chart
Find your size
How to find your correct inline skate / rollerblade size?
For the best performance, inline skates should have a snug fit. It's not necessary to buy inline skates one size larger than your actual foot size; as they break in, all inline skates will expand and widen over time. Please note that everyone has their own measure of comfort, thus please make your final decision also considering your past experience with shoes you are wearing on daily basis. It's important to know that soft boots will expand more than hybrid (Swell etc.) or carbon boots. While we would never recommend any free space and feet movement in soft boot skates, then hardboot skates actually allow more space and comfort level given the improved support of the skate shell.
3 easy steps to measure your feet:
1. Place and fix an A4 sheet flush against a straight wall. Wear your usual skating socks for more accurancy and place your foot on the sheet, with your heel touching the wall, make sure your heel touches the wall without any pressure. |
2. Stand relaxed upon the foot you are measuring. Then, draw a line at your big toe and when marking make sure to hold the pencil vertically to prevent any deviation. It's easiest to ask a friend to draw the line for more precision. Measure the length of the paper to the line: that's your mondopoint size. TIP: For the best fit, measure your foot after a short skating session or at the end of the day. |
3. Do the same for the other foot and compare measurements. The correct size that you should end up with is the length of your longer foot. Now with those measurements, you can take the correct size from our size charts. |
MYFIT liners
 | At MYFIT we are experts in skate parts that improve your fit enhancing your skate performance, but liners are one of these parts that we excel at it. Often overlooked, liners can provide superior qualities to your skate, they can improve the fit, increase responsiveness, add more support, and of course, make you skate more comfortable. |
 | HEAT MOLDING technology. Heat up boots and adjust them! MYFIT logo on your skates means you can heat mold them and shape to foot. How can I heat mold them?
In the process of heating special thermo forming liner materials become soft and puffy. When cooling they stay firm and copy shape of your foot. This is done to achieve maximum comfort, relieve possible pressure points and maximize overall performance. Is heat molding MYFIT liners mandatory? Not at all, because most skaters find them comfortable right out of the box. Also, while skating, they adapt to your feet from natural body temperature! |
 | DUAL FIT technology. Liner that stretches and fits two sizes of feet. The shells of hardboot skates will always cover two sizes no matter which brand you take. So why not use a liner which sufficiently covers two sizes, instead of two single size liners where the smaller size liner comes with thicker padding to fit up the shell? The toe part of a Dual Fit liner is made of 4-way stretchable SBR material which expands and provides a snug comfortable fit and enhances performance. This allowing us to cater to for sizes with a single liner. |
 | MYFIT RECALL MEMORY FIT. Padding made of super comfortable memory foam. Made of a combination of high-quality memory foams, MYFIT Recall Memory Fit liners wraps around your foot comfortably like a sock and provides exceptional lateral support in the ankle area. The memory foam adjusts in seconds to the shape of your foot due to your body heat and this function will work every time you put your feet in your skate. |
 | 3D ANATOMICAL PADDING. 3D shaped ankle padding for fit and comfort. Anatomically shaped and positioned foam padding for more comfort and better performance. The special embossed foam layers adapt perfectly to the skater´s foot and guarantee a comfortable fit and optimized heel lock for better overall performance. It is pre-shaped to fit asymmetrical ankle positions, provides extra heel look, and has smooth and thin edges to avoid pressure points. One-piece embossed padding to fit all skates. |
Related products
Protective gear
Stunt scooters
Inline skates
+371 26035765
WhatsApp
E-Mail
Taktika.lv - specializēts skrituļslidu un skrejriteņu veikals | est. 2005 © 2024
Powered By:
