| If you can't find your size, please contact us and we will do our best to sort it out for you! |
Mery Munoz – Power Skater
Mery Munoz is arguably the best female aggressive and urban skater on the planet. Decorated with countless awards and contest wins, Mery was named Female Skater of the Year from Big Wheel Blading and Be-Mag, among many other accolades. Mery has been a USD pro for years and now has her own pro model urban skate from Powerslide - the Next Mery Munoz 80.
Classic 4-wheel setup – Down to Earth
For her first pro model urban inline skate, Mery chose a classic 4x80mm setup on her custom color Next boot. The skate is complemented with Mery’s hand-picked MYFIT 2nd Skin liner (the same liner as her USD pro model aggressive skate). The skate is a lot like Mery–down to earth without a bunch of bells and whistles. Complete with reliable Elite aluminum cast frames, fast and grippy Spinner 88A wheels and smooth-rolling WICKED ABEC 9 chrome steel bearings, Mery’s favorite urban freeride skate is now available to the public.
Fun, Fast and Customizable Urban Freeride Skate
Make the city your playground with the Next Mery Munoz 80 pro model urban freeride skate from Powerslide. Just like Mery, this impressive pro model skate lets you ride stairs, jump big, slide far and fast, and explore what’s possible on inline skates–just like Mery. The Next Mery Munoz 80 comes with a rigid and durable hard boot shell and a height-adjustable cuff so you can personalize your setup to suit your personal skating style. No two people are the same, and the Next allows skaters to adjust their skate’s flex, support, and comfort level so you can have confidence knowing you’re always skating at your optimum level. Complete with the famous TRINITY 3-point mounting system, the wheels are brought as close to the boot as possible, giving you a low center of gravity, better stability, and improved control. The POWERSLIDE Next Mery Munoz Pro 80 inline skate is a fun, fast, and customizable urban freeride skate perfect for cruising and exploring the city.
Sizes: Dual Sizes
Boot Type: Hardboot
Shell / Outsole Material: Glass-fiber reinforced plastic (GFRP) - GFK
Cuff Material: Glass-fiber reinforced plastic (GFRP) - GFK
Heat Moldability: MYFIT liner with 80°C
Material Upper / Liner: Elasthan, SBR and polyurethane (PU) leather patches
Top Closure: PS Classic micro adjustable buckle
45° Closure / Front Foot Closure: Micro adjustable Force ratchet buckle / Standard lacing
Liner: MYFIT 2nd Skin dual fit liner
Liner Top Closure: Lacing
Innersole: MYFIT EVA skatesole
Shock Absorber: MYFIT, 10mm
Ventilation: Medium
Inline Skate Height in CM: 30,0cm (size 42/43)
Frame Name: Powerslide Elite
Frame Material: ADC10 aluminum
Frame Mounting Standard: TRINITY 3-point mounting
Max. Wheel Size: 80mm
Frame Wheel Base (Inch / MM): 9.6" (243mm)
Frame Axles: Single axle steel 8mm, hex 4mm
Adjustable Side to Side: Yes, TRINITY shell, 4mm
Adjustable Front to Back: Yes, TRINITY X shell, 8mm
Frame Manufacturing Process: 3D cast
Wheel Name: Powerslide Spinner
Wheel Diameter: 80mm
Wheel Hardness: 88A
Wheel Compound: SHR= Super High Rebound
Wheel Bearing Standard: 608 Standard
Wheel Spacer: AL floating (UFO) spacer, 8mm
Wheel Width: 24mm
Bearing Brand: WCD Wicked
Bearing Rating: ABEC 9
Bearing Standard: 608 Standard
Bearing Material: Chrome steel
Bearing Shield: RZ, single sided rubber coated steel shield
Bearing Lubrication: Kyodo grease
Weight: 1585 g (size 40/41)
Included Accessories: 4 pcs. of Screw for 45° buckle, tool - hex 4mm
Brake Compatibility: Powerslide HABS brake (907031)
Wheel Manufacturing Process: Cast
Wheel Setup: 4x80mm
How to find your correct inline skate / rollerblade size?
For the best performance, inline skates should have a snug fit. It's not necessary to buy inline skates one size larger than your actual foot size; as they break in, all inline skates will expand and widen over time. Please note that everyone has their own measure of comfort, thus please make your final decision also considering your past experience with shoes you are wearing on daily basis. It's important to know that soft boots will expand more than hybrid (Swell etc.) or carbon boots. While we would never recommend any free space and feet movement in soft boot skates, then hardboot skates actually allow more space and comfort level given the improved support of the skate shell.
3 easy steps to measure your feet:
1. Place and fix an A4 sheet flush against a straight wall. Wear your usual skating socks for more accurancy and place your foot on the sheet, with your heel touching the wall, make sure your heel touches the wall without any pressure. |
2. Stand relaxed upon the foot you are measuring. Then, draw a line at your big toe and when marking make sure to hold the pencil vertically to prevent any deviation. It's easiest to ask a friend to draw the line for more precision. Measure the length of the paper to the line: that's your mondopoint size. TIP: For the best fit, measure your foot after a short skating session or at the end of the day. |
3. Do the same for the other foot and compare measurements. The correct size that you should end up with is the length of your longer foot. Now with those measurements, you can take the correct size from our size charts. |
 | At MYFIT we are experts in skate parts that improve your fit enhancing your skate performance, but liners are one of these parts that we excel at it. Often overlooked, liners can provide superior qualities to your skate, they can improve the fit, increase responsiveness, add more support, and of course, make you skate more comfortable. |
 | HEAT MOLDING technology. Heat up boots and adjust them! MYFIT logo on your skates means you can heat mold them and shape to foot. How can I heat mold them?
In the process of heating special thermo forming liner materials become soft and puffy. When cooling they stay firm and copy shape of your foot. This is done to achieve maximum comfort, relieve possible pressure points and maximize overall performance. Is heat molding MYFIT liners mandatory? Not at all, because most skaters find them comfortable right out of the box. Also, while skating, they adapt to your feet from natural body temperature! |
 | DUAL FIT technology. Liner that stretches and fits two sizes of feet. The shells of hardboot skates will always cover two sizes no matter which brand you take. So why not use a liner which sufficiently covers two sizes, instead of two single size liners where the smaller size liner comes with thicker padding to fit up the shell? The toe part of a Dual Fit liner is made of 4-way stretchable SBR material which expands and provides a snug comfortable fit and enhances performance. This allowing us to cater to for sizes with a single liner. |
 | MYFIT RECALL MEMORY FIT. Padding made of super comfortable memory foam. Made of a combination of high-quality memory foams, MYFIT Recall Memory Fit liners wraps around your foot comfortably like a sock and provides exceptional lateral support in the ankle area. The memory foam adjusts in seconds to the shape of your foot due to your body heat and this function will work every time you put your feet in your skate. |
 | 3D ANATOMICAL PADDING. 3D shaped ankle padding for fit and comfort. Anatomically shaped and positioned foam padding for more comfort and better performance. The special embossed foam layers adapt perfectly to the skater´s foot and guarantee a comfortable fit and optimized heel lock for better overall performance. It is pre-shaped to fit asymmetrical ankle positions, provides extra heel look, and has smooth and thin edges to avoid pressure points. One-piece embossed padding to fit all skates. |
+371 26035765
WhatsApp
E-Mail
