| If you can't find your size, please contact us and we will do our best to sort it out for you! |
With the Zoom Pro Black 80 Powerslide offers affordable TRINITY mounting urban skates.
Whether you’re new to inline skating or a casual skater looking for a dependable and affordable pair of skates, you’re going to love the POWERSLIDE Zoom Pro Black 80. It all begins with a durable hard boot that embraces a truly classic look. The stylish boot has a stable cuff that provides plenty of support and is complemented by a sophisticated closure system. Combining traditional lacing with a 45-degree ratchet buckle and rugged cuff buckle, you’re getting features normally found on a performance skate on the POWERSLIDE Zoom Pro 80 Black - a stylish, affordable, reliable inline skate. The boot is connected to the precision aluminum cast ELITE frame with the popular TRINITY 3-point mounting system, giving you the lowest possible center of gravity, translating into improved stability, reduced vibrations, and seamless power transfer in every stride. Rolling on POWERSLIDE Hurricane 80mm / 86A wheels and Wicked ABEC 7 bearings, and you have a fast, agile, and affordable inline skate that you won’t want to take off thanks to the comfy MYFIT Basic Dual-fit liner which covers two sizes. For affordable, high-quality, capable, featured-packed inline skates, look no further than the POWERSLIDE Zoom Pro Black 80.
Sizes: Dual / Triple Sizes
Boot Type: Hardboot
Shell / Outsole Material: Glass-fiber reinforced plastic (GFRP) - GFK
Cuff Material: Glass-fiber reinforced plastic (GFRP) - GFK
Heat Moldability: MYFIT liner with 80°C
Material Upper / Liner: Elasthan, SBR and polyurethane (PU) leather patches
Top Closure: PS Classic micro adjustable buckle
45° Closure / Front Foot Closure: Micro adjustable Force ratchet buckle / Standard lacing
Liner: MYFIT Basic dual fit liner
Liner Top Closure: No closure
Innersole: MYFIT EVA skatesole
Ventilation: Medium
Inline Skate Height in CM: 32,0cm (size 41/42)
Frame Name: Powerslide Elite
Frame Material: ADC10 aluminum
Frame Mounting Standard: TRINITY 3-point mounting
Max. Wheel Size: 80mm / 90mm
Frame Wheel Base (Inch / MM): 37-42 = 9.6" (243mm) / 43-47 = 10.8" (275mm)
Frame Axles: Single axle steel 8mm, hex 4mm
Adjustable Side to Side: Yes, TRINITY X shell, 7mm
Adjustable Front to Back: Yes, TRINITY X shell, 8mm
Frame Manufacturing Process: 3D cast
Wheel Name: Powerslide Hurricane
Wheel Diameter: 80mm
Wheel Hardness: 86A
Wheel Compound: HR= High Rebound, Cruising Comfort
Wheel Bearing Standard: 608 Standard
Wheel Spacer: AL floating (UFO) spacer, 8mm
Wheel Width: 24mm
Bearing Brand: WCD Wicked
Bearing Rating: ABEC 7
Bearing Standard: 608 Standard
Bearing Material: Carbon pro steel
Bearing Shield: RZ, Single sided rubber coated steel shield
Bearing Lubrication: Light grease
Weight: 1590g (size 41/42)
Included Accessories: Tool - hex 4mm
Brake Compatibility: Powerslide HABS brake 
Wheel Manufacturing Process: Cast
Wheel Setup: 4x80mm
How to find your correct inline skate / rollerblade size?
For the best performance, inline skates should have a snug fit. It's not necessary to buy inline skates one size larger than your actual foot size; as they break in, all inline skates will expand and widen over time. Please note that everyone has their own measure of comfort, thus please make your final decision also considering your past experience with shoes you are wearing on daily basis. It's important to know that soft boots will expand more than hybrid (Swell etc.) or carbon boots. While we would never recommend any free space and feet movement in soft boot skates, then hardboot skates actually allow more space and comfort level given the improved support of the skate shell.
3 easy steps to measure your feet:
1. Place and fix an A4 sheet flush against a straight wall. Wear your usual skating socks for more accurancy and place your foot on the sheet, with your heel touching the wall, make sure your heel touches the wall without any pressure. |
2. Stand relaxed upon the foot you are measuring. Then, draw a line at your big toe and when marking make sure to hold the pencil vertically to prevent any deviation. It's easiest to ask a friend to draw the line for more precision. Measure the length of the paper to the line: that's your mondopoint size. TIP: For the best fit, measure your foot after a short skating session or at the end of the day. |
3. Do the same for the other foot and compare measurements. The correct size that you should end up with is the length of your longer foot. Now with those measurements, you can take the correct size from our size charts. |
 | At MYFIT we are experts in skate parts that improve your fit enhancing your skate performance, but liners are one of these parts that we excel at it. Often overlooked, liners can provide superior qualities to your skate, they can improve the fit, increase responsiveness, add more support, and of course, make you skate more comfortable. |
 | HEAT MOLDING technology. Heat up boots and adjust them! MYFIT logo on your skates means you can heat mold them and shape to foot. How can I heat mold them?
In the process of heating special thermo forming liner materials become soft and puffy. When cooling they stay firm and copy shape of your foot. This is done to achieve maximum comfort, relieve possible pressure points and maximize overall performance. Is heat molding MYFIT liners mandatory? Not at all, because most skaters find them comfortable right out of the box. Also, while skating, they adapt to your feet from natural body temperature! |
 | DUAL FIT technology. Liner that stretches and fits two sizes of feet. The shells of hardboot skates will always cover two sizes no matter which brand you take. So why not use a liner which sufficiently covers two sizes, instead of two single size liners where the smaller size liner comes with thicker padding to fit up the shell? The toe part of a Dual Fit liner is made of 4-way stretchable SBR material which expands and provides a snug comfortable fit and enhances performance. This allowing us to cater to for sizes with a single liner. |
 | MYFIT RECALL MEMORY FIT. Padding made of super comfortable memory foam. Made of a combination of high-quality memory foams, MYFIT Recall Memory Fit liners wraps around your foot comfortably like a sock and provides exceptional lateral support in the ankle area. The memory foam adjusts in seconds to the shape of your foot due to your body heat and this function will work every time you put your feet in your skate. |
 | 3D ANATOMICAL PADDING. 3D shaped ankle padding for fit and comfort. Anatomically shaped and positioned foam padding for more comfort and better performance. The special embossed foam layers adapt perfectly to the skater´s foot and guarantee a comfortable fit and optimized heel lock for better overall performance. It is pre-shaped to fit asymmetrical ankle positions, provides extra heel look, and has smooth and thin edges to avoid pressure points. One-piece embossed padding to fit all skates. |
+371 26035765
WhatsApp
E-Mail
